Do you have a question about the NOMA 043-5116-4 and is the answer not in the manual?
Before use, familiarize yourself with all operating features and safety rules of the heater.
Place heater in coldest area, avoid obstructions. Plug directly into a grounded 120V AC outlet.
Plug into a grounded outlet; power indicator will illuminate and display will show status.
Details the digital display, indicator lights, and control buttons on the heater's top panel.
Learn how to turn the heater on, select heat settings (Low/High), and return to standby.
Switch between Celsius and Fahrenheit units by pressing the MODE button.
Adjust the desired temperature using UP/DOWN buttons; the indicator light confirms thermostat is active.
Set the heater run time (1-12 hours) using the MODE and UP/DOWN buttons.
Configure both thermostat and timer settings for simultaneous operation.
Understand the caution light indicates overheating and automatic shutdown; refer to safety features for reset.
Clean exterior with a damp cloth; do not use harsh chemicals or immerse in water.
Do not operate if damaged; store in original carton, securing the power cord.
Heater has automatic overheat protection and a safety tip-over switch for automatic shutdown.
Follow general precautions for safe operation, including avoiding burns and supervising children.
Adhere to restrictions on outdoor use, wet areas, damaged parts, and extension cords.
Ensure proper cord placement, avoid blocking ventilation, and prevent foreign object insertion.
Note on pet sensitivity to initial fumes and recommendations for safe use around birds and small pets.
Understand electrical safety, polarized plug usage, and the risks of using extension cords.
Do not operate with damaged parts or obstructed ventilation to prevent hazards.
Details the limited one-year warranty against defects in workmanship and materials.