mode after 2, 3, or 4 minutes. You can choose “NO AUTO MONITOR” to
deactivate this feature. If you select the 2, 3, or 4 minutes option, the Mini-
SuperGraph II will automatically go into monitor mode after the selected
period of time; the time begins after the last key is pressed. If you have not
selected a set up preference, it will default to the set up used for the last
operation.
This option is intended for instances when an operator may forget to put the
Mini-SuperGraph II into monitor mode. If you set this feature to “no auto
monitor”, the operator will need to press all keys necessary to begin
monitoring with the unit. If the unit is not placed in monitor mode, the event
will not be recorded.
Use this option to check the status of the battery voltage. The real voltage is
shown on the screen. A bar indicator shows the battery status. Please note
that when the unit is not connected to a charging system, the charging
voltage will appear as 0 V. The unit will stop monitoring at 5.4 volts and
return to the NOMIS MAIN MENU.
To Next Page
Loading...