Noo-psyche K7 PRO III - User Manual

K7 PRO III Operation Guide
Install Noo-psyche APP
First, download the Noo-psyche APP. Install the Noo-Psyche APP on your
device and “Allow Noo-Psyche to access this device's location” to continue.
For IOS: Download from App Store
For Android: Download from www.noo-psyche.com/Userguidance or scan the
QR code:
Keys Instruction
How to switch the light to Auto or manual?
Indicator was
Operation
Indicator become
Red(manual)
Click the L Key
Blue(auto)
Blue(auto)
Red(manual)
Notice: Only the light always on blue(auto) can connect to the APP.
Connection Mode
There are two method for the APP to connect to the light: by AP mode or by
LAN mode. No matter which method is used, it can be used as long as it is
connected.
How to know if the light is on LAN or AP connection mode?
Operation
If Indicator
Means
it’s on
Click the R Key
Flashes blue twice
LAN mode
Flashes Red twice
AP mode
How to Switch LAN and AP mode of the light?
Switch to
Precondition
Operation
AP mode
The Indicator
always on
Blue(auto)
Press & hold the R key, the indicator flashes
blue, loosen the R key after it stops flashing
LAN mode
Press & hold the R key, the indicator flashes
red, loosen the R key after it stops flashing

Noo-psyche K7 PRO III Specifications