This document describes a rear-view camera system designed for vehicles, providing enhanced visibility for safer driving and parking maneuvers. The system includes a monitor and a rear-view camera, offering a comprehensive solution for drivers.
Function Description
The device serves as an auxiliary system to aid drivers in detecting people, objects, or potential hazards, thereby preventing damage or injury. It is not a substitute for safe, proper, or legal driving practices. The system provides a clear view behind the vehicle, which is particularly useful for reversing and parking. The monitor displays the area behind the vehicle, with the camera system designed to activate automatically when the vehicle is put into reverse. The system ensures that the driver has an improved view of objects behind the vehicle, helping to avoid small children and other obstacles that might not normally be visible.
Important Technical Specifications
The system comprises a 5-inch TFT LCD monitor and a car charger with a 3.0A USB output.
- Resolution: 480 x 272 pixels
- Rated voltage: 10-16 V
- Rated current: 20-200 mA
- Monitor inputs: 2 RCA inputs (V1 and V2)
- USB output: 5 V, 3 A
- Operating temperature: -20 °C to +70 °C
The power cable for the monitor is designed to connect to the vehicle's cigarette lighter jack, typically providing 10-16V. The camera connects to the monitor via an RCA cable.
Usage Features
Installation:
The installation process is designed to be straightforward.
- Monitor Connection: Connect the monitor to the vehicle's cigarette lighter jack using the car charger.
- Monitor Placement: The monitor can be installed on the dashboard or windshield using the suction cup mount with adhesive gel. It is recommended to adjust the monitor's angle to ensure a clear view without obstructing the driver's view of the surroundings.
- Camera Connection: Connect the rear-view camera to the RCA cable of the monitor. Ensure the monitor and camera are correctly installed and connected.
- System Activation: Start the vehicle and put it into reverse gear. The camera and monitor should automatically activate. If necessary, adjust the angle of the rear-view camera to get the best view of objects behind the vehicle.
Operation:
- Automatic Activation: The camera system automatically activates when the vehicle is put into reverse.
- Enhanced Visibility: The monitor displays the area behind the vehicle, providing a wider perspective than traditional mirrors.
- Obstacle Detection: The system helps in detecting small children and other obstacles that may not be visible otherwise.
Safety Instructions:
- Always read the user manual carefully before using the product.
- Install the product within the specified voltage range to avoid electrical shock or product malfunction.
- Ensure proper installation to prevent electrical shocks or product malfunctions.
- If smoke or a burning smell is detected, immediately disconnect the system.
- Clean the product with special care.
- The power cable should be routed carefully to avoid short circuits or damage.
- Do not install the monitor where it may obstruct the driver's view or block an airbag device.
- Securely clamp the power cable to prevent it from being hooked or snagged.
- Keep all cables away from hot or moving parts and electrical noise components.
Maintenance Features
General Care:
- The device should be handled with care to avoid damage.
- Regularly check the cables for any signs of wear or damage.
- Clean the monitor screen periodically to maintain clear visibility.
Troubleshooting:
- In case of any issues, refer to the troubleshooting section of the manual.
- If the system does not activate, check all connections, especially the power supply and RCA cables.
- If the image is unclear, ensure the camera lens is clean and free from obstructions.
Disposal and Recycling:
- The product is compliant with all basic EU regulatory requirements.
- Selective collection of waste electrical and electronic equipment is mandatory. Electrical equipment must not be disposed of with household waste.
- According to European Directive 2012/19/EU on waste electrical and electronic equipment, and its transposition into national law, waste electrical equipment must be collected separately and disposed of in designated collection points.
- Contact local authorities or the vendor for advice on recycling.
The manufacturer, Norauto, emphasizes that it is not responsible for any short circuits, battery damage, fire, or other issues arising from incorrect installation of the unit. It is recommended to have the unit installed by a qualified auto electrician to ensure proper and safe operation.
To Next Page
Need help?
General
