42
Call Transfer
During talking, press
button
to transfer audio
from the unit to your mobile phone.
Note:
Some mobile phones will transfer audio from
the unit to themselves once the incoming call
is answered.
Music Mode
A2DP
A2DP is short for Advanced Audio Distribution
Profile. The mobile phones supporting this
function can transmit stereo audio, whereas
the ones not supporting this function can
transmit mono audio only.
General Notes for Bluetooth
1. For some types of mobile phones, during
our test, after the mobile phones appear
connection successful, the unit still appear
waiting for pairing. At this time you must nd
the unit’s Bluetooth module name “NS-201
BT” on the pairing list on your mobile phone
and select connecting in the submenu, then
the unit will appear CONNECT. Otherwise,
there is no voice coming out when
communicating, though the mobile phone
has already displayed CONNECT. Some
mobile phones, when it play back A2DP,
you must nd the unit name in the phone’s
menu and reconnect (check your mobile
phone whether has the A2DP & AVRCP
functions).
2. When pairing, some types of mobile phone
hint that how to operate, for example, when
you make a phone call by the unit, if the
mobile phone voice dosn’t be transferred to
the unit, no voice comes out.
3. Depending on the mobile phone, if private
mode is selected, when you make a phone
call by the unit, or receive, the voice would
be transferred to the mobile phone. But
sometime the Bluetooth maybe disconnect
till the communication ends, then connects
your mobile phone to the unit automtically.
Some mobile phones maybe need pair
again.
4. For mobile phone, the Bluetooth device
name must be primary symbols or
numbers. Otherwise, some unpredictable
issues may occur during the Bluetooth
devices connecting and making phone call.
5. After CONNECT, if no sound produced,
please check whether the Bluetooth stereo
audio on the phone switched ON.
BLUETOOTH OPERATIONS
To Next Page
Loading...
