92
EN
BLUETOOTH (R) OPERATION
1 2
3
9
Before using
Bluetooth
Before you can use a Bluetooth device to make hands-free
calls or stream audio. it must be authenticated. This is also
referred to as “pairing” a device.
Pairing a New Device
The unit broadcasts the pairing signal constantly when
no devices are currently connected. Complete the pairing
sequence from your Bluetooth device. Refer to the owner’s
manual for your device for more details. The device name is
“NS-X2800DBT”. The unit can be in any mode of operation
when pairing is performed. On certain phones, pairing may
need to be done more than once.
Connect
The head unit will automatically connect to the last
connected device when the connect feature is set to Auto
connect On. If the connect featu
re is set to Auto Connect
Off, the head unit will not automatically connect to any
device.
Bluetooth Phone
From the main menu, touch the Bluetooth on the screen.
Bluetooth icon will appear anytime a Bluetooth device is
connected.
1. Main Menu Press
icon to return to Main Menu screen.
2. Current Mode
Indicator
Displays current mode of operation.
3. Bluetooth Status
indicator
When Bluetooth is On and a Bluetooth device is being
paired, the indicator will flash. When Bluetooth is On and a
phone is connected to the unit, the indicator will illuminate
steady.
4. Setup Press “SETUP” to access Bluetooth settings.
5. Bluetooth Music
Press MUSIC to transfer audio between the unit and mobile
phone.
6. Call Log
Press the Call Log to show( Dialled, Missed and Received
Calls ).
7. Phone Book Press “CONTACTS” to access phone book menu.
To Next Page
Loading...
Need help?
General
