norbar PneuTorque Standard Series User Manual

norbar PneuTorque Standard Series

23 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

OPERATOR’S MANUAL

PNEUTORQUE

®

STANDARD SERIES STALL TOOLS

Part Number 34317 | Issue 5 | Original Instructions (English)

NORBAR TORQUE TOOLS LTD

Wildmere Road, Banbury,

Oxfordshire, OX16 3JU

UNITED KINGDOM

Tel + 44 (0)1295 270333

Email enquiry@norbar.com

NORBAR TORQUE TOOLS

45–47 Raglan Avenue, Edwardstown,

SA 5039

AUSTRALIA

Tel + 61 (0)8 8292 9777

Email enquiry@norbar.com.au

NORBAR TORQUE TOOLS INC

36400 Biltmore Place, Willoughby,

Ohio, 44094

USA

Tel + 1 866 667 2279

Email inquiry@norbar.us

NORBAR TORQUE TOOLS PTE LTD

194 Pandan Loop

#07-20 Pantech Business Hub

SINGAPORE 128383

Tel + 65 6841 1371

Email enquires@norbar.sg

NORBAR TORQUE TOOLS (SHANGHAI) LTD

91 Building 7F, No.1122 North Qinzhou Rd,

Xuhui District, Shanghai

CHINA 201103

Tel + 86 21 6145 0368

Email sales@norbar.com.cn

NORBAR TORQUE TOOLS INDIA PVT. LTD

Plot No A-168, Khairne Industrial Area,

Thane Belapur Road, Mahape,

Navi Mumbai – 400 709

INDIA

Tel + 91 22 2778 8480

Email enquiry@norbar.in

www.norbar.com

© Norbar Torque Tools Ltd 2018

Table of Contents

Questions and Answers:

L
Lisa BarkerAug 6, 2025
What to do if norbar PneuTorque Standard Tools output does not rotate when trigger pushed?
- D
  Desiree HarrisAug 6, 2025
  If the Norbar Tools output doesn't rotate when the trigger is pushed, there are several potential causes. First, check that the air supply is functioning and properly connected, ensuring the air pressure setting is at least 1 bar. Also, verify the correct setting of the direction knob. If these steps don't resolve the issue, the output drive square may be sheared and require replacement, or the gear train or air motor might be damaged.
C
Christine MillerAug 14, 2025
Why Norbar Tools does not stall?
- L
  Larry LeeAug 14, 2025
  If the Norbar Tools does not stall, it could be due to several reasons. The tool may not have achieved the required torque, in which case you should increase the air pressure. Alternatively, the fastener may have sheared, or the thread may be stripped. In some cases, the gear train or air motor could be damaged.
S
Shelley MorganAug 21, 2025
What to do if my Norbar Engine tool does not stall?
- C
  Cynthia Donaldson MDAug 21, 2025
  If the Norbar Engine tool isn't stalling, it could be because the tool hasn't reached the required torque. Try increasing the air pressure. Alternatively, the fastener may have sheared or the thread stripped. In another case, the gear train or air motor might be damaged, requiring a return for repair.
K
Kenneth HintonAug 29, 2025
Why is the output of my Norbar Engine tool not rotating?
- K
  Kari HarrisAug 29, 2025
  If the output of your Norbar Engine tool isn't rotating when you operate the control system, start by checking that the air supply is functioning and properly connected. Ensure the air pressure setting is at least 1 bar. Verify the control system settings are correct. If these steps don't resolve the issue, the output drive square may be sheared, requiring replacement (refer to the maintenance section). In more serious cases, the gear train or air motor might be damaged, necessitating a return for repair.

norbar PneuTorque Standard Series Specifications

General

Brand	norbar
Model	PneuTorque Standard Series
Category	Tools
Language	English

Summary

Safety

General Safety Rules

General safety guidelines for installation, operation, repair, and maintenance of the tool.

Operating Hazards

Hazards associated with tool operation including crushing, impacts, cuts, abrasions, and heat.

Workplace and Ergonomic Hazards

Risks from repetitive motions, accessories, workplace conditions, dust, and fumes.

Noise and Vibration Hazards

Dangers of hearing loss and nerve/blood supply damage from noise and vibration exposure.

Pneumatic and Tool Specific Safety

Safety instructions for pneumatic tools, PneuTorque specific features, and tool markings.

Introduction

Parts Included

Lists the components that are supplied with the PneuTorque® Standard Series tools.

Accessories

Details the optional accessories available for the PneuTorque® tools.

Features and Functions

Replaceable Drive Square

Explains the shear design of the drive square for overload protection and easy replacement.

Trigger and Controls

Describes the function of the trigger and the forward/reverse selector collar.

Gearbox and Lifting Handle

Details the gearbox for safety and the lifting handle for ergonomic use.

Operator Comfort and Monitoring

Highlights low operator fatigue and optional torque transducers for monitoring.

Set Up Instructions

Pneumatic Connections

Instructions for connecting the tool to the air supply and the Lubro Control Unit.

Torque Reaction Setup

Guidance on fitting the reaction plate and ensuring correct torque reaction.

Forward/Reverse and Torque Settings

Procedures for setting direction and adjusting torque for tightening and loosening.

Operating Instructions

Tightening Procedure

Step-by-step guide for performing fastener tightening operations with the tool.

Speed Settings

Instructions for operating tools with manual and automatic two-speed selections.

Releasing Procedure

Step-by-step guide for releasing fasteners using the PneuTorque® tool.

Maintenance

Component Maintenance

Routine checks and replacement of components like silencers and filters.

Drive Square Maintenance

Information on drive square fixing, replacement, cleaning, and disposal.

Specifications

General Specifications

General operating parameters, air supply, and environmental requirements.

Standard Series Specifications

Detailed torque, speed, and weight specifications for the Standard Series tools.

Dimensions

Provides dimensional data (A, B, C) for various PneuTorque® models.

EU Declaration of Conformity

Trouble Shooting

Problem Resolution

Guide to common problems encountered with the tool and their likely solutions.

Glossary of Terms

Definitions of technical terms and abbreviations used throughout the manual.

Related product manuals

norbar PNEUTORQUE PT 9