To Next PageTo Next Page
Need help?Do you have a question about the Norcold NRF60 and is the answer not in the manual?
Contact Norcold Service Center for parts or service assistance.
Outlines what the warranty does not cover and conditions that void it.
Defines Norcold's responsibility and excludes consequential damages.
Informs users about specific legal rights granted by the warranty.
Understand safety alert symbols and signal words (Warning, Caution) for hazard identification.
For vehicles/boats; place on level, dry surface away from heat and water.
Operates on 12/24V DC, in ambient temps 14-109°F, 90% humidity, up to 20° tilt.
Avoid storing combustibles near unit to prevent hazards and maintain performance.
Avoid touching frozen parts with wet hands; disconnect power for maintenance.
Connect DC power cord to unit and vehicle's cigarette lighter; set power switch to ON.
Select position 3 for recommended battery protection; check positions for AC/DC converter use.
Two modes (Factory, Memory) to set temperature between -13°F and 108°F.
Toggle between °F/°C; use 'set' and arrow buttons to adjust temperature.
Unit has a delay feature at start-up; temperature display should update within 15 minutes.
Set temperature appropriately in moderate ambient temps to avoid excessive battery drain.
Monitor DC voltage (below 10.7V reduces performance); check specific gravity.
Cooling unit generates heat that needs efficient removal for optimal performance.
Ensure free airflow around condenser coils and compressor for correct operation.
Design utilizes natural convection for airflow; cool air enters below, warm air exits above.
Maintain 4 inches clearance around vents; 48 sq. inches ventilation area above compressor compartment.
Ensure adequate ventilation space during storage and operation; avoid obstructions.
Use covered dishes/bags; prevent drying and odor transfer; do not refreeze thawed food.
Defrost when frost builds up; use caution with tools and heat sources.
Clean interior with mild detergent and water; rinse and dry. Avoid abrasives.
Explains power/error light codes for diagnosing operational issues.
Addresses no power, wrong voltage, or low voltage problems and their solutions.
Covers fan speed and temperature errors, often related to ambient conditions or obstructed vents.
Capacity, dimensions, voltage, power, temp range, weight, refrigerant, features for NRF-30.
Capacity, dimensions, voltage, power, temp range, weight, refrigerant, features for NRF-45.
Capacity, dimensions, voltage, power, temp range, weight, refrigerant, features for NRF-60.
Lists and identifies numbered components in the wiring diagram, including control board, compressor, sensors, switches.
Contact Norcold Service Center for parts or service assistance.
Outlines what the warranty does not cover and conditions that void it.
Defines Norcold's responsibility and excludes consequential damages.
Informs users about specific legal rights granted by the warranty.
Understand safety alert symbols and signal words (Warning, Caution) for hazard identification.
For vehicles/boats; place on level, dry surface away from heat and water.
Operates on 12/24V DC, in ambient temps 14-109°F, 90% humidity, up to 20° tilt.
Avoid storing combustibles near unit to prevent hazards and maintain performance.
Avoid touching frozen parts with wet hands; disconnect power for maintenance.
Connect DC power cord to unit and vehicle's cigarette lighter; set power switch to ON.
Select position 3 for recommended battery protection; check positions for AC/DC converter use.
Two modes (Factory, Memory) to set temperature between -13°F and 108°F.
Toggle between °F/°C; use 'set' and arrow buttons to adjust temperature.
Unit has a delay feature at start-up; temperature display should update within 15 minutes.
Set temperature appropriately in moderate ambient temps to avoid excessive battery drain.
Monitor DC voltage (below 10.7V reduces performance); check specific gravity.
Cooling unit generates heat that needs efficient removal for optimal performance.
Ensure free airflow around condenser coils and compressor for correct operation.
Design utilizes natural convection for airflow; cool air enters below, warm air exits above.
Maintain 4 inches clearance around vents; 48 sq. inches ventilation area above compressor compartment.
Ensure adequate ventilation space during storage and operation; avoid obstructions.
Use covered dishes/bags; prevent drying and odor transfer; do not refreeze thawed food.
Defrost when frost builds up; use caution with tools and heat sources.
Clean interior with mild detergent and water; rinse and dry. Avoid abrasives.
Explains power/error light codes for diagnosing operational issues.
Addresses no power, wrong voltage, or low voltage problems and their solutions.
Covers fan speed and temperature errors, often related to ambient conditions or obstructed vents.
Capacity, dimensions, voltage, power, temp range, weight, refrigerant, features for NRF-30.
Capacity, dimensions, voltage, power, temp range, weight, refrigerant, features for NRF-45.
Capacity, dimensions, voltage, power, temp range, weight, refrigerant, features for NRF-60.
Lists and identifies numbered components in the wiring diagram, including control board, compressor, sensors, switches.
General| Brand | Norcold |
|---|---|
| Model | NRF60 |
| Category | Refrigerator |
| Language | English |
