Norcold Polar 7 Series User Manual

Owner’s Manual 23
Fault codes Fault Code Meanings Corrective Actions
Alternately ashes “no” “FL” with
an audible alarm
The burner did not ignite or re-ignite.
Turn the refrigerator power OFF and then back ON to reset.
Check:
- That the valve of the propane gas tank(s) is open
- That the propane gas is at the correct pressure
- That the manual shut off valve of the refrigerator gas valve is
open
- That there is no air in the propane gas supply line
- Please see your dealer or authorized Norcold Service Center
Alternately ashes “no” “AC” with
an audible alarm
AC voltage is not available to the refrigera
-
tor.
Turn the refrigerator power OFF and then back ON to reset.
Check:
- That the refrigerator is plugged into a serviceable outlet
- That the fuse or circuit breaker of the vehicle is intact
- That the vehicle generator is operational (if applicable)
- Please see your dealer or authorized Norcold Service Center
Alternately ashes “AC” “HE” with
an audible alarm
This fault indicates a problem relating to
the AC heater.
This is not owner serviceable. Please see your dealer or authorized
Norcold Service Center.
Alternately ashes “AC” “rE” with
an audible alarm
This fault is within the refrigerator controls.
This is not owner serviceable. Please see your dealer or authorized
Norcold Service Center.
Alternately ashes “Lo” “dc”
These faults indicate the DC input voltage
to the refrigerator is too low.
Check:
- That the battery charging equipment of the vehicle is operational
- That the AC/DC converter is operational (if applicable)
- Please see your dealer or authorized Norcold Service Center
Alternately ashes “Lo” “dc” with
an audible alarm
Alternately ashes “Lo” “dC” with
an audible alarm.
Alternately ashes “HI” “dc” with
an audible alarm.
This fault indicates the DC input voltage to
the refrigerator is too high.
Turn the refrigerator power OFF and then back ON to reset.
Check:
- That the battery charging equipment of the vehicle is operational
- That the AC/DC converter is operational (if applicable)
- Please see your dealer or authorized Norcold Service Center
Alternately ashes “no” “dt” with an
audible alarm.
This fault indicates a loss of communica
-
tion between the refrigerator controls.
Turn the refrigerator OFF and then back ON to reset.
If the fault code continues, please see your dealer or authorized
Norcold Service Center.
Displays “Sr” with an audible alarm.
This fault is within the refrigerator elec
-
tronic controls.
Turn the refrigerator OFF and then back ON to reset.
If the fault code continues, please see your dealer or authorized
Norcold Service Center.
Alternately ashes “oP” “LI” with
an audible alarm.
This fault is within the refrigerator elec
-
tronic controls.
Turn the refrigerator OFF and then back ON to reset.
If the fault code continues, please see your dealer or authorized
Norcold Service Center.
Alternately ashes “FL” “- -” with
an audible alarm.
This fault indicates a ame is sensed at
the burner when there should be none
present.
This is not owner serviceable. Please see your dealer or authorized
Norcold Service Center.
Temperature setting ashes on/off
at one (1) second intervals any
-
time the user interface (control) is
“awake”
The thermistor has been sensed as inop
-
erable, so the temperature is being con-
trolled via backup operating system.
This is not owner serviceable. Please see your dealer or authorized
Norcold Service Center.
Blank display The refrigerator is off or refrigerator will not
turn on.
Turn the refrigerator power ON
Check:
- That the battery charging equipment of the vehicle is operational
- That the AC/DC converter is operational (if applicable)
- Please see your dealer or authorized Norcold Service Center
Fault Codes(All N7LX and N8LX models)

Norcold Polar 7 Series Specifications

General

Brand	Norcold
Model	Polar 7 Series
Category	Refrigerator
Language	English