57
7. Installation
Securing product to worktop.
Fig. 3
The liquid inside the appliance must have time to settle after transportation and a minimum stabilisation period of three
hours is recommended prior to switching on the appliance.
The two enclosed ventilation grids are to be installed in the base in accordance with g. 4. To ensure the correct function-
ing of the appliance, these grilles must not be covered. NOTE: Remember to use the black plastic sleeves
between handle and front! Apply moderate torque when screwing in these screws.
NOTE: Front/decorative base not included
Fig. 4
178
226
95
To Next Page
Loading...
