Need help?Do you have a question about the nord NORDAC SK 215E and is the answer not in the manual?
General safety instructions and personnel qualifications for operating drive power converters.
Crucial safety guidelines and precautions for installing and operating frequency inverters.
General guidelines for installing the NORDAC SK 200E frequency inverter, including motor-mounted and wall-mounted versions.
Detailed steps for installing the SK 200E frequency inverter, including screw tightening torques.
Essential guidelines for wiring frequency inverters to ensure EMC compliance and safe operation.
Step-by-step procedure for accessing and making electrical connections to the SK 200E unit.
Details on connecting the power unit, including mains voltage, motor, and braking resistor connections.
Specifics on connecting the mains supply to the frequency inverter, including cable cross-section and tightening torque.
Guidelines for connecting the motor cable, including maximum length and cross-section recommendations.
Instructions for connecting the control unit, detailing terminal types, cable cross-sections, and tightening torques.
Presents an overview of external control devices like SimpleBox and ParameterBox for commissioning and control.
Details the features and functions of the SimpleBox as a simple parameterisation and control tool.
Guides on commissioning the SK 200E with minimal effort using mains and 24V control voltage.
Explains how to configure the frequency inverter using DIP switches without additional control units.
Describes the function of integrated potentiometers P1/P2 and diagnostic LEDs for setup and status indication.
Covers fundamental parameters for inverter settings, including parameter sets, acceleration, deceleration, and frequency limits.
Details parameters for motor-specific data, characteristic curves, and their impact on performance.
Parameters related to speed control, torque control, field weakening, and encoder functions.
Explains how to configure and use the control terminals for various input and output functions.
Comprehensive list of error codes, their causes, and recommended remedies for troubleshooting.
Information on EMC directives and compliance display methods for electrical equipment.
Explains situations that lead to reduced output power, like high pulse frequencies or heat sink temperature.
To Next Page
General
