3.Storage, Transport,
Preparation, Installation
www.nord.com B1050-GB-0213 -15-
Figure 3-8: Securing
Figure 3-9: Dismantling
1 Fastening element
2 Securing ring
3 Assembly – threaded rod
4 Assembly – threaded nut
6 Protective cover
7 Disassembly of threaded rod
8 Disassembly element
9 Disassembly – threaded nut
When assembling push-on gears with torque supports, the support must not be distorted.
Distortion-free assembly is made easier if an elastic element (Option DG) is used.
To Next Page
Loading...