Need help?Do you have a question about the Nordic Lab Termaks TS 9026 and is the answer not in the manual?
Details the left display, right display, and key functions.
Step-by-step guide for changing settings on the device.
Instructions for operating the standard timer function.
Describes the indicators and actions upon cycle completion.
Details the main switch and external connection points for the chamber.
Shows target, actual, and logged temperature data.
Lists and explains various status and alarm messages shown on the display.
Details displays for fan speed, air valve, and time.
Explains how temperature logging works and its parameters.
Covers PIN code, timer options, and language selection.
Covers setting target temperature, cycle time, and real time.
Details fan speed, air valve, and temperature alarm limit settings.
Covers calibration constants like Zero Point Constant (Z) and Amplifying Factor (A).
Describes the standard timer's features, limitations, and operation.
Explains the real-time program for multi-temperature control.
Illustrates week and day cycle programming examples.
Details the fan's speed adjustment and operating behavior.
Details the air valve's opening and operational behavior.
Explains the preferred shutdown method and its effects on the chamber.
Explains the optional system to stop unauthorized settings.
Lists common alarm situations, explanations, and disabling conditions.
Describes the potential-free alarm output connections and behavior.
Defines the components of a schedule: start block, end mode, and temp blocks.
Details parameters for temperature blocks: run time, temperature, and ramp.
Details the configuration parameters for Schedule 1.
Details the configuration parameters for Schedule 2.
Details the configuration parameters for Schedule 3.
Details the configuration parameters for Schedule 4.
Details the configuration parameters for Schedule 5.
Explains how to choose which of the 5 available schedules to use.
Covers selecting start day, hour, and minute for a schedule.
Explains how to select the cabinet's behavior after a schedule is completed.
Explains how to choose which temperature block to set.
Explains how to set the number of hours for a block to run.
Explains how to set the desired temperature for a block.
Explains how to set the temperature ramping rate for a block.
Details the safety thermostat's automatic operation and protection features.
Explains how to calculate and apply the amplifying factor for calibration.
Explains how to calculate and apply the zero point constant for calibration.
General| Brand | Nordic Lab |
|---|---|
| Model | Termaks TS 9026 |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
