Nordic Lab Termaks TS 9135

Need help?

Do you have a question about the Nordic Lab Termaks TS 9135 and is the answer not in the manual?

Summary

Basic Functions

Control Panel Overview

Describes the functions of keys, LEDs, and display areas on the control panel.

Setting and Timer Operation

Guides on changing settings, operating the standard timer, and cycle completion status.

Installation and Connections

Display Information Overview

Temperature Logging Details

Details how temperature data is logged, updated, and reset.

Comprehensive Settings Menu

Temperature, Time, and Fan Control

Covers setting target temp, cycle time, fan speed, and real-time clock.

Air Valve and Alarm Limit Configuration

Details air valve settings and temperature alarm limits.

Calibration and Timer Mode Selection

Adjusting calibration constants, timer modes, and language.

Timer System Configuration

Standard Timer Operation

Describes the default timer, its limits, and restart behavior.

Real Time Program Operation

Details the advanced Real Time Program for multi-temperature cycles.

Fan and Air Valve Control

Standby Mode Operation

Security and Alarm Management

Alarm Output and Acknowledgment

Describes external alarm signals and how to stop audible/visual alarms.

Schedule and Ramping Setup

Visual Guide to Schedule Selection

Illustrates selecting schedules, days, hours, minutes, and end modes for operation.

Setting Schedule Block Parameters

Guides on configuring runtime, temperature, and ramp rate for individual schedule blocks.

Sterilization Cycle Procedure

Safety Thermostat Function

Chamber Calibration Procedures

Amplifying Factor and Zero Point Calibration

Covers calculating and setting amplifying factor and zero point constants.