Nordic nRF52840 Getting Started Guide

Programming an application
4. Select Build > Rebuild project_target to rebuild the project.
Alternatively, press ALT + F7.
The output should now look similar to this, with space reserved for the SoftDevice:
5. Right-click your project and select Edit Options.
6. Select Preprocessor.
7. Add the definition NO_VTOR_CONFIG to the Preprocessor Definitions.
This definition tells SES to expect a SoftDevice to be present that will forward exceptions and interrupts
to the application.
1159720_163 v1.1
22

Nordic nRF52840 Specifications

General

Clock Speed	64 MHz
Flash Memory	1 MB
RAM	256 KB
USB	USB 2.0 Full Speed
Operating Voltage	1.7 V to 5.5 V
GPIO	48
IEEE 802.15.4	Yes
NFC	NFC-A Tag
Temperature Range	-40°C to +85°C
ADC Resolution	12-bit
Processor	ARM Cortex-M4
Bluetooth	Bluetooth 5.0
Package	QFN48, WLCSP