Do you have a question about the Nordyne M1MA 056 and is the answer not in the manual?
Instructions for connecting the main power supply wires to the furnace.
Details on connecting thermostat wires to the furnace control system.
Critical safety precautions to follow before attempting to light the furnace.
Detailed steps for lighting the furnace pilot light.
Details factory settings and required checks for burner adjustments.
Explains how to check and adjust gas pressure and pilot flame.
Lists checks for when the main burner fails to ignite.
Troubleshoots issues where the gas valve is powered but no main flame appears.
Explains the indicator lights for Honeywell R7184 oil primary control.
Describes the light indicators for the Beckett 7505 oil primary control.
Troubleshooting steps for when the burner motor does not run during a heat call.
Diagnosis for situations where the combustion blower operates but no flame is present.
Steps to diagnose why the ignitor is not heating up when the control module is powered.
Explains reasons for burner lockout after ignition, such as grounding or air adjustment.