NOREGON DLA+ 2.0 - User Manual

NOREGON DLA+ 2.0

70 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

!

!

!

! !

Table of Contents

Questions and Answers

M
Monica LoganAug 1, 2025
What to do if the NOREGON Adapter power light is on but my application isn't communicating?
- E
  Evan MackAug 1, 2025
  If the NOREGON Adapter power light is on but your application isn't communicating, first ensure that the appropriate drivers have been installed. Next, verify that the connection settings are correct. Also, check that the cables are securely connected and that the vehicle ECU is powered up by ensuring the vehicle ignition is on. Finally, confirm that a minimum of 8.5V is being supplied to the adapter.

Summary

License Agreement

Product Overview and Specifications

Introduction to the DLA+ 2.0 Adapter Family

Introduces the DLA+ 2.0 Adapter Family, its function, and connector types.

Adapter LED Indicators

Explains the meaning and behavior of the DLA+ 2.0 Adapter's LED lights.

System Requirements

Details the minimum PC hardware and operating system requirements for the adapters.

Supported Protocols and Standards

Lists the communication protocols and standards the DLA+ 2.0 Adapters support.

Supply Voltage and Environmental Specs

Covers supply voltage, temperature, and environmental specifications for the adapters.

Critical Usage Warning

Warning against using reprogramming features while in wireless mode.

Installation and Configuration

Pre-Installation Requirements

Notes on administration privileges and accessing installation files.

Driver Installation Process

Step-by-step guide for installing the DLA+ 2.0 adapter drivers.

DLA+ 2.0 Wireless Configuration (ASSY REV A.xx)

Specific instructions for configuring the DLA+ 2.0 Wireless Adapter (ASSY REV A.xx).

Connecting to Local;Corporate Networks

Steps to configure the adapter for a local or corporate network connection.

Configuring for Peer-to-Peer Network

Guide to setting up a peer-to-peer wireless connection with the adapter.

DLA+ 2.0 Wireless Configuration (ASSY REV B.xx)

Specific instructions for configuring the DLA+ 2.0 Wireless Adapter (ASSY REV B.xx).

Connecting to Existing Wireless Network

Steps to connect the ASSY REV B.xx adapter to an existing wireless network.

Favorites Feature for IP Addresses

Guide on using the Favorites feature to manage adapter IP addresses.

Advanced Wireless Setup (Windows 7)

Navigating Windows Network Settings

Steps to access network settings via the Windows 7 Control Panel.

Connecting to the LTRX_IBSS Network

Procedure to connect to the LTRX_IBSS wireless network and configure properties.

Firmware Updates and Maintenance

Automatic Firmware Update Process

Instructions for automatic firmware updates triggered by the OEM application.

Manual Firmware Update Procedure

Steps for manually updating the adapter's firmware using the update tool.

Wireless Reception and Testing

Wireless Reception Guidelines

Tips to improve wireless signal strength by minimizing obstructions and interference.

Testing Vehicle Connections

How to use the Noregon Adapter Connectivity Test to verify connections.

Troubleshooting and Support

Frequently Asked Questions (FAQ)

Answers to common questions regarding adapter functionality and troubleshooting.

RP1210 Error Code Reference

A comprehensive list of RP1210 error codes and their descriptions.

Noregon Technical Support Contact

Contact information for Noregon Systems Help Desk for further assistance.

Appendix 1: Connectify and Windows Configuration

Connectify Software Installation Guide

Instructions for installing and setting up the Connectify software.

Windows Wireless Settings Configuration

Detailed steps for configuring wireless network settings in Windows.

NOREGON DLA+ 2.0 Specifications

General

Brand	NOREGON
Model	DLA+ 2.0
Category	Adapter
Language	English