Noritsu QSS-3202 PRO - User Manual

Noritsu Quick Service System
QSS-32 series
Installation Manual
This manual is for the following machines.
• QSS-3201 Digital
• QSS-3201SM Digital
• QSS-3202 Digital
• QSS-3202SM Digital
• QSS-3203 Digital
• QSS-3203SM Digital
• QSS-3211 Digital
• QSS-3211SM Digital
• QSS-3212 Digital
• QSS-3212SM Digital
• QSS-3213 Digital
• QSS-3213SM Digital
• QSS-3202 PRO Digital Printer
• QSS-3202SM PRO Digital Printer
• QSS-3203 PRO Digital Printer
• QSS-3203SM PRO Digital Printer
• Do not allow any people other than the service personnel to work. It may cause them electric shock, burn and injury.
[for service personnel only]
Distributed by: minilablaser.com

Summary

Notes for Service Personnel

Laser Precautions

Before Installing

Place for Installation

Countermeasure for Static Electricity

Guidance on using static-dissipative tools to protect electronic parts from static damage.

Work Flow

Work Flow [N]

Step-by-step guide for installing the machine with the Normal specification.

Work Flow [SM]

Step-by-step guide for installing the machine with the SM specification.

Removing the Packing Angle Brackets

Paper Processor Section

Instructions for removing packing brackets from the paper processor section.

Desk Section

Steps to remove packing angle brackets from the desk section.

Scanner Section

Procedure for removing packing brackets from the scanner section.

Installing the Component Parts and Units

Printer Section

Steps to attach scratch prevention guide and lock levers in the printer section.

Paper Processor

Desk Section

Scanner Section

Installing the Machine and Adjusting the Level

Adjusting the Level of Paper Processor Section

Connecting the Printer and the Paper Processor

Connecting the Desk Section and the Printer Section (Power Cable)

Measuring the Resistance

Connecting the Desk Section and the Printer Section (Signal Cable)

Connecting the Scanner Section and the Desk Section (Signal Cable)

Connecting the Power Supply

Connecting the Power Supply

Detailed procedure for connecting the machine's power supply safely and correctly.

Filling the Tanks with Processing and Replenishment Solutions

Filling the Tanks for Normal Specification

Filling the Tanks and Attaching the Replenishment Packages [SM]

Installing the Optional Triple Magazine

Noritsu QSS-3202 PRO Specifications