11
3
Mix for desired temperature.
The factory temperature setting is 120°F (fixed). Mix with cold water with a mixing valve
or at the fixture for desired temperature.
To prevent scalding.
1
Check that electrical power is connected.
2
4
How to Use (Not using the remote controller)
Setting and Using the Water Heater
If you want to the temperature to be changed to 130°F or 140°F, contact the installer or Noritz.
Turn on hot water.
Turn off the hot water.
DANGER
High Temperature
The electrical power does not need to
be disconnected between uses.
Hot water
Water
Hot Water Heater temperatures over 125°F can cause
severe burns instantly or death from scalding.
• Children, disabled and elderly are at the highest risk of being scalded.
Feel water temperature before bathing or showering.
Temperature limiting valves are available, ask professional person.
To Next Page
Loading...
Need help?
General
