Norstar Doorphone Installation Guide
6
Installation
Step 2: Program Station Ports (cont’d)
4. Direct Dial
❏ ensure the Doorphone is not assigned as a Direct Dial telephone
5. Capabilities
❏ enable Full Handsfree
❏ disable Auto Handsfree
❏ enable Paging
Note: The Doorphone may be used as a paging device by assigning a page
zone, but it should not be assigned the page zone used for its own door chimes.
❏ disable the Auxiliary Ringer
❏ ensure the Doorphone does not Call Forward on Busy
❏ ensure the Doorphone does not Call Forward on No Answer
❏ ensure the Do not disturb feature (DND) is turned off
❏ ensure Hotline is assigned “None”
6. Service Modes
❏ ensure the Doorphone is not a control set
❏ ensure the Doorphone is not assigned as an extra-dial set
❏ ensure the Doorphone is not assigned as a ringing set
Note: Configuration headings may not be exactly as shown, depending on the KSU
software version.
To Next Page
Loading...