Operation | 56
(Diagnostic Menu Continued)
Remote Test
Provides a means for testing of
remote fault relays to confirm
they are operating correctly.
Relays can be activated one at a
time. Scroll between relays with
up/down arrow buttons and press
Set once to turn on relay, press
again to turn it off.
Output Test
Provides a means for activating
all humidifier components (inlet
valve, drain valve, contactor etc.)
for diagnostic purposes.
Components can be activated
one at a time. Scroll to
component to be tested using
up/down buttons, press Set once
to activate, press again to turn
off.
Performance
Factory code for configuring the
humidifier. Do not enter any
values.
To Next Page
Loading...
Need help?
General
