EasyManua.ls Logo

Nortec NHTC - User Manual

Nortec NHTC
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
NH
Series
Installation and
Operation Manual
Includes installation, operation
maintenance and troubleshooting
information for your NHTC / NHPC
Electric Steam humidifier
2522381-H | 09 JUN 2010
Important:
Read and save these instructions. This guide to be left with equipment.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Nortec NHTC and is the answer not in the manual?

Summary

Installation

Electrical Connections

Explains primary power connection requirements for single and three-phase NHTC/PC units.

External Controls Wiring

Guides on connecting external controls like On/Off, modulating, transducer, reset, fault, and multi-mode systems.

Start Up

Installation Check

Pre-operation inspection to ensure the installation was performed correctly before powering on.

Start Up Procedure

Step-by-step guide for powering up the humidifier and initiating operation.

Start Up Checklists

Checklists to ensure all prerequisites are met before and during the initial startup process.

Operation

NHTC Humidifier Configuration

Detailed steps for navigating the NHTC software, including menus and various configuration settings.

NHPC Humidifier Configuration

Detailed steps for navigating the NHPC software, including menus and various configuration settings.

Maintenance and Servicing

Required Maintenance Procedures

Outlines routine checks and tasks to keep the humidifier in good condition.

Cylinder Replacement

Step-by-step guide for removing the old cylinder and installing a new one.

Troubleshooting

Summary

Installation

Electrical Connections

Explains primary power connection requirements for single and three-phase NHTC/PC units.

External Controls Wiring

Guides on connecting external controls like On/Off, modulating, transducer, reset, fault, and multi-mode systems.

Start Up

Installation Check

Pre-operation inspection to ensure the installation was performed correctly before powering on.

Start Up Procedure

Step-by-step guide for powering up the humidifier and initiating operation.

Start Up Checklists

Checklists to ensure all prerequisites are met before and during the initial startup process.

Operation

NHTC Humidifier Configuration

Detailed steps for navigating the NHTC software, including menus and various configuration settings.

NHPC Humidifier Configuration

Detailed steps for navigating the NHPC software, including menus and various configuration settings.

Maintenance and Servicing

Required Maintenance Procedures

Outlines routine checks and tasks to keep the humidifier in good condition.

Cylinder Replacement

Step-by-step guide for removing the old cylinder and installing a new one.

Troubleshooting

Nortec NHTC Specifications

General IconGeneral
BrandNortec
ModelNHTC
CategoryHumidifier
LanguageEnglish

Related product manuals