15Receiving and Storage
4 Receiving and Storage
4.1 Inspection
Upon receiving:
– Inspect shipping boxes for damage.
Any damages of the shipping boxes must be reported to the shipping company without delay.
– Check packing slip to ensure all parts have been delivered.
All material shortages are to be reported to your Nortec supplier within 48 hours after receipt of the
goods. Nortec Humidity Ltd. assumes no responsibility for any material shortages beyond this period.
The standard delivery includes the Nortec RS steam humidier with the options ordered (see Sec-
tion 3.4) packed in cardboard boxes along with the installation manual (this document), operation
manual and spare parts list.
– Unpack the parts/components and check for any damage.
If parts/components are damaged, notify the shipping company immediately.
– Check whether the components are suitable for installation on your site according to model key
shown on the specication label.
4.2 Storage and Transportation
Storing
Until installation store the Nortec RS in its original packaging in a protected area meeting the following
requirements:
– Room temperature: 41 ... 104 °F (5 ... 40 °C)
– Room humidity: 10 ... 75 %rh
Transportation
For optimum protection, always transport the unit and components in the original packaging and use
appropriate lifting/transporting devices.
WARNING!
It is the customer's responsibility to ensure that operators are trained in handling heavy goods and that
the operators comply with the appropriate regulations on work safety and the prevention of accidents.
Packaging
Keep the original packaging of the components for later use.
In case you wish to dispose of the packaging, observe the local regulations on waste disposal. Please
recycle packaging where possible.
To Next Page
Loading...
Need help?
General
