A circuit breaker must be used.
of at least 3mm（ 1/8 in） in all poles should be
connected in fixed
wiring.
magnet buckle
and heating buckle function, to protect
from circuit-short and
overload.
3
Precautions
note
the capacity table. Air switch should include.
Make sure the power supply matches the requirement
listed on nameplate. Unstable power supply or
incorrect
wiring may cause malfunction. Please install proper power
supply cables before using the air conditioner.
An all-pole disconnection switch having a contact separation
Follow all the electric safety regulations when installing
the unit.
grounding wire.
Properly connect the live wire, neutral wire and
any work related to electricity .
Be sure to cut off the power supply before performing
Include a circuit break with suitable capacity, please
Air Conditioner should be properly grounded. Incorrect
Use only an approved power cord.
grounding may cause electric shock.
Use approved power supply circuit and circuit breaker
according to local regulations.
Installation must be performed by qualified professionals.
Otherwise, it may cause personal injury or damage.
Attachment
WARNING
To Next Page
Loading...
