Nortek C6BA Series User Manual

C6BA Series Split System Indoor Cased Coils
IMPORTANT
ATTENTION INSTALLERS:
It is your responsibility to know this product better than your customer. This includes being able to install the
product according to strict safety guidelines and instructing the customer on how to operate and maintain the
equipment for the life of the product. Safety should always be the deciding factor when installing this product
and using common sense plays an important role as well. Pay attention to all safety warnings and any other
special notes highlighted in the manual. Improper installation of the furnace or failure to follow safety warnings
could result in serious injury, death, or property damage.
These instructions are primarily intended to assist qualified individuals experienced in the proper installation
of this appliance. Some local codes require licensed installation/service personnel for this type of equipment.
Please read all instructions carefully before starting the installation. Return these instructions to the customer’s
package for future reference.
DO NOT DESTROY. PLEASE READ CAREFULLY & KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.
INSTALLATION INSTRUCTIONS

Nortek C6BA Series Specifications

General

Brand	Nortek
Model	C6BA Series
Category	Air Conditioner
Language	English

Summary

Installation Instructions

Installer Responsibilities and Safety Guidelines

Emphasizes installer's duty for safe installation, customer education, and adherence to all safety warnings.

Critical Safety Warnings and Precautions

Details specific warnings (nitrogen, Proposition 65, electrical) and mandatory safety protocols for installation and service.

Coil Installation Procedures

Covers general installation, electrical hazards, condensate drainage, and specific steps for upflow and horizontal orientations.

Refrigerant Line Connections and System Preparation

Explains system depressurization, TXV installation, lineset connection, and refrigerant charging requirements.

Completing Installation and Maintenance

Covers final installation checks, condensate drain setup, air filter requirements, and periodic maintenance tasks.