iii
BMC II AMAT Quick Reference Guide
Publication history
May 1996
Standard 01.01.
First standard issue.
July 1997
Standard 02.01.
• Integrated the new Quick Reference Guide template into this document.
• Added the 1 and 2 GB disk drives to the BMC AMAT Front View figure
in BMC II AMAT Figures.
• Added DMS-10 and DMS-100 software and firmware files reference
tables to BMC II AMAT Figures.
• Modified Maintenance Commands with commands left out of first
issue:
— DELFILE f v1 v2
— LSTDIR ALL SORT
— LSTDIR FILE f v1 v2
— IDXMAINT DIR CLOSED t LAST v
— IDXMAINT DIR CLOSED t NEXT v
— IDXMAINT EXAMINE t HDR s
— IDXMAINT EXAMINE LOG DATE d
— IDXMAINT EXAMINE LOG HOUR x
— IDXMAINT EXAMINE LOG MSG n
— BX25PARM t
— BX25PARM t v
— BX25PARM PRIHDR
— BX25PARM PRIHDRx
— DMSO p aa
— DMSP xxxx
— SETTERM TIMEOUT
— SETTERM TIMEOUT x
— DELETE f v1:v2.
• Added notes concerning the necessity to execute the LINIT and SIT-
DAT WRITE commands after modification of the value of a command
in the CP Commands and Site Dependent Data Commands subsections
of the Maintenance Commands.
• Added a disk capacity and related number of total tracks available table
to the Disk Commands subsection of Maintenance Commands.
• Moved listing for VALPARM LOGHDR command from Site Data
Commands subsection to Testing Commands subsection of Maintenance
Commands.
• Added a CMD and STA code descriptions table to the TEC/DSI Com-
mands subsection of Maintenance Commands.
• Removed the Bus Terminator PCA from the list of valid PCAs in the
Miscellaneous PCA Replacement Procedure.
• Modified the Disk Drive Replacement Procedure section to support the
1 GB (Turbo and Non-Turbo) and 2 GB (Turbo only) disk drive systems
• Modified the BMC AMAT disk drive options table to reflect the proper
option settings for the 380 MB Non-Turbo disk drives and the new 1
and 2 GB disk drives in the Disk Drive Replacement Procedure.
To Next Page
Loading...
Need help?
General
