Nortel DMS-100 Series Maintenance Manual

297-8211-550 Standard 05.01 August 1999
Application
Use this procedure to replace an NTRX41 card in an MSP.
PEC Suffixes Name
NTRX41 AA Alarm Module
Common procedures
None
Action
The following flowchart is only a summary of the procedure. To replace the
card, use the instructions in the step-action procedure that follows the
flowchart.
NTRX41
MSP
8-186 Card replacement procedures 8-1868-186

Nortel DMS-100 Series Specifications

General

Capacity	Up to 100, 000 lines
Features	ISDN support
Redundancy	Yes
Signaling	SS7, ISDN
Power	-48V DC