Nortel Meridian 1 Option 11C User Manual

Meridian 1
Option 11C
2.0 Mb DTI/PRI
Document Number: 553-3011-315
Document Release: Standard 13.00
Date: January 2002
Year Publish FCC TM
Copyright © 1992– 2002 Nortel Networks
All Rights Reserved
PrintedinCanada
Information is subject to change without notice. Nortel Networks reserves the right to make changes in design
or components as progress in engineering and manufacturing may warrant. This equipment has been tested
and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC rules, and the
radio interference regulations of Industry Canada. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at their own expense.
SL-1 and Meridian 1 are trademarks of Nortel Networks.

Nortel Meridian 1 Option 11C Specifications

General

Brand	Nortel
Model	Meridian 1 Option 11C
Category	Network Hardware
Language	English

Summary

Meridian 1 Option 11C Introduction

ISDN Features Overview

Provides information on ISDN features and references related guides for detailed descriptions.

2.0 Mb DTI Implementation

Overview and Hardware Requirements

Details on installing the 2.0 Mb DTI card, including overview and hardware requirements.

NTAK10 Card Installation and Configuration

Covers NTAK10 card installation, switch settings, and cable connections for DTI.

DTI Software Programming

Guides the user through programming basic 2.0 Mb DTI on Meridian 1 Option 11C systems.

2.0 Mb PRI Implementation

Overview and Hardware

Provides an overview of PRI implementation, hardware requirements, and card descriptions.

PRI Installation and Configuration

Guides on installing PRI cards, daughterboards, switches, and related hardware.

PRI Software Configuration and Commands

Explains PRI software programming, configuration commands, and parameters.

DTI Maintenance Procedures

DTI Overview and Card Replacement

Provides an overview of DTI maintenance and the procedure for replacing the NTAK10 card.

DTI Monitoring, Errors, and Alarms

Details DTI monitoring, error messages, alarms, and grade-of-service status.

DTI Maintenance Tools and Tests

Lists DTI maintenance commands, clock controller commands, and testing procedures.

PRI Maintenance Procedures

PRI Overview and Enable/Disable

Provides an overview of PRI maintenance and procedures for enabling/disabling cards.

PRI Error Detection and Alarms

Details PRI error types, alarms, thresholds, and slip conditions.

PRI Maintenance Commands and Testing

Lists PRI maintenance commands, DCHI/DDCH commands, and testing procedures.

ISL Implementation and Maintenance

ISL Overview and Requirements

Provides an overview of ISL implementation, requirements, and modes of operation.

ISL Installation and Configuration

Details ISL hardware installation and software configuration for shared and dedicated modes.

ISL Maintenance and Testing

Covers ISL maintenance, DCHI quick reference, and back-to-back testing procedures.