To Next PageTo Next Page
Need help?Do you have a question about the Nortel Optical Multiservice Edge 6130 and is the answer not in the manual?
General| Manufacturer | Nortel |
|---|---|
| Category | Network Hardware |
| Humidity | 5% to 95% non-condensing |
| Interfaces/Ports | Multiple Ethernet |
| Supported Protocols | MPLS, Ethernet, IP |
| Power Supply | Redundant |
| Management | CLI, SNMP, Web-based |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Model | Optical Multiservice Edge 6130 |
| Weight | 50 lbs |
Document supports OME6130 Release 1.0.
Identifies intended readers for this publication.
Details the various network applications for OME6130.
Covers OME6130 integration into Nortel's optical portfolio management.
Summarizes the platform's flexibility, scalability, and cost-effectiveness.
Describes the OME6130 hardware platform chassis and its rack mounting.
Summarizes supported tributary circuit packs for service interfaces.
Lists supported configurations for STM-1/4 line interfaces.
Covers nodal port-to-port connection management capabilities.
Explains 1+1 MSP and SNCP traffic protection schemes.
Details how active alarms are indicated and stored.
Describes the line level traffic protection scheme.
Explains the path level traffic protection scheme.
Details end-to-end paths without alternate paths for traffic.
Describes the OME6130 platform chassis and its equipped cards.
Details the specifications and functionality of the DC PSU.
Explains the main circuit pack providing STM-1/4 interfaces and shelf control.
Overviews the different tributary interface circuit packs supported.
Lists available SFP modules with order codes and notes.
Describes the graphical, nodal management tool accessed via HTTP web-browser.
Covers monitoring system events through SNMP traps for consolidated alarm reporting.
Details the process of commissioning and system testing for the network element.
Describes support for loopbacks on various ports for testing and troubleshooting.
Explains continuous collection, analysis, and reporting of performance data.
Outlines security and administration capabilities managed from the local craft access terminal.
Lists physical specifications for OME6130 network elements and chassis.
Details power consumption for common equipment and circuit packs.
Provides details on optical specifications for SFPs, including dispersion and attenuation.
Outlines general commercial, regulatory, and laser emission safety specifications.
Documents configuration rules including slot numbering and equipping.
Provides orderable codes for OME6130 product components.
Step-by-step guide for ordering chassis, circuit packs, and software.
Step-by-step guide for ordering accessories, documentation, and services.
Provides contact information for Nortel Networks technical support.
Details the process and form for returning damaged circuit packs.
Introduces OME6130 as an IP managed optical network element.
Explains logical representation of management channels for OAM&P.
Explains TCP/IP Internet Protocol (IP) and its use with OME6130.
Details manual configuration of static routes for network connectivity.
Describes OSPF as an open, link-state routing protocol.
Offers examples of physical and logical DCN implementations.
Illustrates static routing via direct LAN connections to network elements.
