Need help?Do you have a question about the North Star MONOBLOCK and is the answer not in the manual?
Details the Indicator LED and Standby Button on the front panel.
Describes Balanced and Single-Ended audio inputs and the input selection switch.
Covers remote turn-on, speaker binding posts, and AC mains inlet/switch.
Details the Indicator LED and Standby Button on the front panel.
Describes Balanced and Single-Ended audio inputs and the input selection switch.
Covers remote turn-on, speaker binding posts, and AC mains inlet/switch.
General| Signal-to-Noise Ratio | >100dB (A-weighted) |
|---|---|
| Input Impedance | 47k Ohms |
| Type | Monoblock Power Amplifier |
| Total Harmonic Distortion | <0.05% |
| Damping Factor | >200 (1kHz) |
To Next Page