To Next PageTo Next PageWhy is my North Storm NS-10W-AC so noisy?
The noise from your North Storm Air Conditioner could be due to a couple of factors. It might be placed on ground that isn't level or flat (place the unit on a flat, level ground if possible). Also, the sound might come from the normal flowing of the refrigerant inside the air conditioner, which is normal.
Why is my North Storm Air Conditioner not cool enough?
Your North Storm Air Conditioner might not be cooling effectively due to several reasons: doors or windows may be open (ensure they are closed), heat sources inside the room may be present (remove them if possible), the exhaust air hose might be disconnected or blocked (connect or clean it), the temperature setting could be too high (reset it), or the air inlet could be blocked (clean it).
What to do if North Storm NS-10W-AC Air Conditioner does not start?
If your North Storm Air Conditioner isn't starting, there could be a few reasons. The water full indicator lamp might be blinking because the water tank is full (empty the water tank). Alternatively, if in electric heating mode, the room temperature might be higher than the set temperature, or in cooling mode, the room temperature might be lower than the set temperature (reset the temperature in either case).
What to do if North Storm NS-10W-AC shows E2/E4 code?
If your North Storm Air Conditioner displays an E2 or E4 code, it means the water tank is full. Please empty the water tank.
General| Brand | North Storm |
|---|---|
| Model | NS-10W-AC |
| Category | Air Conditioner |
| Language | English |
Key safety precautions and warnings for operating the appliance.
Identifies components shown in front and side views of the unit.
Identifies components shown in the rear view of the unit.
Lists and shows all accessory items provided with the unit.
Explanation of the control panel's buttons and LED window.
Detailed explanation of each button on the remote controller.
Essential steps to perform before operating the air conditioner.
Guidance on operating in different modes and related cautions.
Instructions for setting the timer and managing water drainage.
Requirements for unit placement, clearance, and socket wiring.
Step-by-step instructions for installing the exhaust hose.
Process for installing the window slider kit for hose venting.
Safety declarations, air filter maintenance, and cleaning instructions.
Process for cleaning the exterior surface of the air conditioner.
Solutions for unit not starting, not cooling, and noise problems.
Interpretation and resolution for specific error codes (EO, E2/E4).
Detailed specifications for cooling, power, dimensions, and weight.
Information on authorized repairs, safety, and warranty limitations.
