USER MANUAL SURFBOARDS 11
• We recommend washing all kitesurng equipment with fresh water after each session and
drying it in the shade.
• Your North Surfboard is fragile. Avoid damaging it when not in use by storing it in a board bag.
• Avoid unnecessary UV exposure by storing your board away from direct sunlight.
• Avoid exposure to hot temperatures such as inside an unventilated car. Store board in
temperatures not exceeding 45 degrees Celsius.
• When using the North product with non-North accessories, please refer to their manual to
ensure compatibility.
• Check board and inserts prior to use. Ensure screws are tight and there are no cracks,
holes or scratches which could compromise your board’s structure.
• Tighten the strap screws rmly. Do not over tighten. These screws are subject to extreme
loads and should be checked regularly if still tight.
NOTE: This North Kiteboarding Surfboard is designed for kitesurng and surng in and around
waves. This surfboard is not intended for large jumps such as kiteloops etc. Breakage is possi-
ble on hard landings due to the lightweight and high-performance design. Direct large wave
impact and direct impact with hard objects, can damage or break the board.
Serial number can be found on the tail of the board on the base. PLEASE REFER TO
OVERVIEW ON PAGE 8.
BOARD CARE
SERIAL NUMBER
To Next Page
Loading...