Need help?Do you have a question about the Northern N-1000-III and is the answer not in the manual?
General| Type | Control Panel |
|---|---|
| Manufacturer | Northern |
| Communication | Ethernet, Serial |
| Power | 24 VDC |
| Display Type | LCD |
| Display Size | 10.4 inch |
| Resolution | 800 x 600 pixels |
| Touchscreen | Resistive |
| Operating Temperature | 0° to 50°C (32° to 122°F) |
| Storage Temperature | -20° to 60°C (-4° to 140°F) |
| Humidity | 5% to 95% RH, non-condensing |
| Power Supply | 24 VDC |
| Power Consumption | 15W (typical) |
| Dimensions | 288 x 224 x 65 mm (11.3 x 8.8 x 2.6 inches) |
| Weight | 1.8 kg (3.97 lbs) |
| Enclosure Rating | IP65 (front panel) |
Describes panels as decision-making units with CPU and memory, operating independently after programming.
Details power supply needs (16.5 VAC or 12 VDC) and battery backup capabilities (up to 4 hours).
Explains DIP switch functions for baud rate/panel address and jumper settings for communication modes.
Covers reader/keypad programming, code verification, and activation of output points.
Provides wiring diagrams and specifications for connecting card readers and eleven-conductor keypads.
Details wiring for PC to C-100-A1, C-100-A1 to panels, and RS-485/RS-232 configurations.
Emphasizes proper panel grounding, consolidated earth ground benefits, and wire routing.
Details primary power options (AC/DC) and backup battery connections, including power fail detection.
Covers key commands (A, C, D, E, F, G, H, I, M, N, O, P, R, T, V, W, Z) for panel configuration.
To Next Page
