Need help?Do you have a question about the Northern NVR16POE and is the answer not in the manual?
General| Model | NVR16POE |
|---|---|
| Type | Network Video Recorder |
| Number of Channels | 16 |
| PoE Support | Yes |
| PoE Ports | 16 |
| Video Compression | H.264 |
| Recording Resolution | Up to 8MP (4K) |
| Storage Capacity | Up to 10TB |
| Network Interface | 10/100/1000 Mbps Ethernet |
| Power Supply | 48 VDC |
Instructions on setting the initial administrator password for device activation and security.
Covers the steps for discovering, activating, and adding IP cameras to the NVR.
Details various functions available during live view, like screen modes and recording.
Instructions on setting up parameters for PTZ (Pan, Tilt, Zoom) camera control.
Covers configuring PTZ camera presets, patrol paths, and movement patterns.
Details how to set parameters like resolution, frame rate, and stream type for recording.
Guides on setting up daily or weekly schedules for automatic recording.
Explains how to enable and configure motion detection for triggering recordings.
Details setting up recordings based on external alarm inputs.
Guides on configuring recordings triggered by Video Content Analysis (VCA) alarms.
Provides methods for searching and playing back recorded video files.
Instructions on playing back recorded files for a specific camera channel.
Guides on playing back recorded footage within a specified date and time range.
Details searching and playing back recordings based on specific events like alarms.
Covers using smart playback to efficiently review video based on detected events.
Provides methods for exporting recorded files to backup storage devices.
Details the process for quickly exporting selected record files.
Guides on backing up files found through normal video search criteria.
Explains how to back up recordings that are triggered by specific events.
Guides on configuring motion detection parameters and alarm actions.
Details how to configure handling actions for external sensor alarms.
Explains how to detect video loss and configure associated alarm responses.
Guides on detecting video tampering (lens cover) and setting alarm responses.
Details how to detect VCA (Video Content Analysis) alarms from cameras.
Explains how to configure actions like audible alerts, notifications, and outputs for alarms.
Guides on setting basic NVR parameters like language, resolution, and time.
Covers advanced network and system settings for enhanced functionality.
Instructions on formatting and preparing new Hard Disk Drives for NVR use.
Steps to resolve issues where no image appears on the monitor.
Steps to resolve IP cameras frequently going offline or showing disconnected.
Troubleshooting steps when no record files are found or detected.
To Next Page
