Operation
16
2) Press the Engine Start/Stop button to start the
engine (Engine Start/Stop button will blink green
illumination while engine start and turn solid
green once engine has successfully started).
NOTICE:
• The engine will repeat the start
sequence three times if the engine
fails to start. To terminate startup,
toggle the engine switch to the
"OFF" position.
• When not in use, keep the engine
switch at the "OFF" position to
avoid the loss of battery power.
Shutdown of the Engine (Recoil Models
Only):
114593 (804313) and 114594 (804314):
1. Toggle the engine switch to
the "OFF" position.
Shutdown of the Engine (Electric Start
Model Only):
114656 (804315):
1. Press and release the
Engine Start/Stop button
(Engine Start/Stop will blink
red while engine is stopping
and turn solid red once
engine has successfully
shutdown).
2. Toggle the engine switch
to "OFF" position.
NOTE:
• In case of emergency, the engine
switch can be directly toggled
to the "OFF" position.
• When not in use, keep the engine
switch at the "OFF" position to
avoid the loss of battery power.
To Next Page
Loading...