18
By pushing the bar with your feet you can
now change the direction of the rudder
blade.
Lead the end of the pull-up rope back
through pin and attach it to the rudder
with the carabiner.
8) Instructions for disassembling
The disassembling corresponds the assembling in reverse order.
Before folding the hull, lay it out flatly.
Fully drain the air from the sponsons.
You can also do this with the supplied
pump, since it has a suction function.
Then fold the sides in the middle
(lengthwise) as shown.
Fold it like shown on the next pictures…
Bow-section
To Next Page
Loading...