Need help?Do you have a question about the Norton Clipper C1318P and is the answer not in the manual?
Explains hazardous symbols related to fuel, heat, guards, moving parts, exhaust, speed, and lifting.
Explains icons for reading instructions, eye/ear/lung/hand protection, and blade rotation.
Warns about dust and silica hazards from cutting materials and California Proposition 65.
Covers initial setup, including lifting points and handlebar installation.
Details the process and hardware for attaching the handlebars.
Explains how to attach the blade shaft guard and blade guard.
Step-by-step instructions for mounting the saw blade.
Guides on how to start the Honda and Kohler engines.
Information on connecting and using the water supply for wet cutting.
Provides guidance on proper cutting methods and safety.
Schedule and instructions for maintaining the Honda engine.
Schedule and instructions for maintaining the Kohler engine.
Instructions on lubricating and maintaining bearings.
Details on adjusting and maintaining the V-belt tension.
Guidelines for ordering replacement parts using UPC and part numbers.
Exploded view and part list for depth control and lock components.
Exploded view and part list for handlebar assembly components.
Exploded view and part list for the blade guard assembly.
Exploded view and part list for the blade shaft components.
Exploded view and part list for the belt tensioning system.
Exploded view and part list for the engine mounting components.
Exploded view and part list for the main frame components.
Exploded view and part list for the water tank and related parts.
Exploded view and part list for the front pointer assembly.
Identification of various decals and their locations on the machine.
General| Blade Diameter | 350 mm |
|---|---|
| Segment Height | 10 mm |
| Arbor Size | 25.4 mm |
| No-load speed | 8500 rpm |
| Shaft diameter | 25.4 mm |
To Next Page
