To Next PageTo Next PageWhy is my Norwood Farm Equipment plugging completely?
Your Norwood Farm Equipment may be plugging completely because the ground speed is too low. Increase the speed as specified in the operations manual. Alternatively, the working depth might be too deep. Set the depth to 2-3 inches in the spring and 3.5-4.5 inches in the fall.
What to do if Norwood Farm Equipment does not track straight?
If your Norwood Farm Equipment does not track straight, it might not be level from front to back. Adjust the hitch link height to the tractor drawbar. You can also add a depth stop to rear attachment cylinders or wheel strut cylinders. Reducing machine tracking spacing for more overlap or adjusting AutoTrac to the left or right might also help.
General| Brand | Norwood |
|---|---|
| Model | Kwik-Till HSD2500 |
| Category | Farm Equipment |
| Language | English |
