14
3. Attach the Penguin head to the device housing.
4. The device is ready for use.
c) Push the nose tip into place.
b) Place the two parts of the
Penguin head in the correct
position.
WARNING
!
Make sure your charger is compatible with
your electrical outlet. Failure to do so may
cause electric shock or re.
DO!
DO!
CAUTION
!
If you haven’t used your device for a longer
period of time, make sure to charge it
before use.
Clean the parts of the Penguin head before
use.
Make sure that all parts are dried thoroughly
before use.
To Next Page
Loading...
