13
4. Before use
1. Charging the device
2. Assembling the Penguin head
WARNING
!
The device is intended to be used only for
removing nasal discharge from a child’s
nose. It shall not be used for any other
purposes.
DON’T!
a) Attach the charging cable to the
connector situated at the back
of the device housing
a) Clean and dry the parts of the
Penguin head.
Charging is in process if the LED
indicator on the charger is red.
Charging is complete once the
light turns green.
b) Plug the other end of the charger
into a 100-240V AC outlet.
Penguin head part A
Penguin head part B
Nose tip
To Next Page
Loading...
