Nostalgia Electrics SCC-200 - Screws, Studs, and Nuts; Step 1: Unpacking and Initial Check; Step 2: Attaching the Push Handle

ENGLISH 4
ASSEMBLY (Continued)
Screws, Studs, and Nuts
ASSEMBLY
1. Open the box and remove all parts including the Main Unit, Storage
Compartment, Wheels, Legs, and all other contents (including the Push Handle
and accessories).
2. Attach the Push Handle to the Storage Compartment using four of the #1 screws
(as shown below):
Main Unit
Base Support
Storage
Compartment
1
2
3
4
5
6
7
8