Nostalgia CCP400 - Page 11

ENGLISH
9
Assembly of Main Unit
Attaching Door Handle
1. Attach #9 Magnet to transparent door of Main Unit (A).
2. Place #12 Door Handle using two #5 Screws.
3. Place Main Unit (A) onto the top of the Storage Compartment (B).
4. Ensure that the two inserting pins at the bottom of the Main Unit (A) line up correctly so
that Main Unit (A) can be locked under the beam of the Storage Compartment (C).
ON / OFF / LIGHT Switch
Crank Handle
Stainless Steel Kettle