To Next Page

To Previous Page

INA 15092:I 05/30/01

INTELLIGENT NETWORK ANNUNCIATOR

APPENDIX

SOFTWARE TYPE IDS

All annunciator points must declare an appropriate software type identification during programming. The declaration of a

software type allows the INA to identify the type and configuration of specific devices mapped to it.

Each type ID is categorized by groups. There are 3 separate groups of software type IDs which are defined in the tables

below. Each table consists of the following format:

Type ID - This is the software type entered by the programmer for a particular point.

Display Label - This is the form that the INA displays the Software Type ID on the CRT

Monitor and the LCD.

Type of Device - Type of devices compatible and description of operating parameters for the

particular type ID.

The INA will not permit the changing of a Software Type ID in one group to a Software Type ID in another group. To

accomplish this, the point must be reinstalled with the Software Type ID of the desired group by using the Full Point

Programming option of the Main Programming Menu.

Network Annunciator Control

Network Annunciator Zone

Network Annunciator Point

Note: For a complete description of Software Type IDs for specific devices and zones, refer to the AM2020/AFP1010

manual.

.D.IepyTlebaLyalpsiDeciveDfoepyT

TSAAPETS/KCANNA puorgANIehtnisedonllarofPETS/EGDELWONKCAetucexeotdesutnioProtaicnunnA

PMLATSTPMALNNATSETPMALlacoletucexeotdesutnioProtaicnunnA

SERATESERNNA puorgANIehtnisedonllarofTESERMETSYSetucexeotdesutnioProtaicnunnA

SGSA

LISGISNNA puorgANIehtnisedonllarofECNELISLANGISetucexeotdesutnioProtaicnunnA

.D.IepyTlebaLyalpsiDeciveDfoepyT

NOZN

ENOZKROWTEN enozkrowtenPCAFnaotpamotdesutnioProtaicnunnA

.D.IepyTlebaLyalpsiDeciveDfoepyT

TPAN

TNIOPNUNNAKROWTEN tnioProtainunnAPCAFnawodahsotdesutnioProtaicnunnA

Notifier INA User Manual

Questions and Answers: