- PERIODICALLY WASH THE DRIVE BELT AND DAMPING RINGS. USE WARM SOAPY WATER AND
AIR DRY.LINT FREE CLOTH IS BEST FOR CLEANING YOUR TURNTABLE. AVOID USING POLISH. A
SIMPLE DUST IS BEST. YOU MAY WISH TO COVER YOUR TURNTABLE WITH A PIECE OF
MATERIAL WHEN NOT IN USE.
- SWITCH OFF WHEN NOT IN USE.
- REPLACE RECORD DUST COVER WHEN NOT IN USE.
- CLEAN THE STYLUS BACK TO FRONT WITH METHYLATED SPIRITS AND SMALL BRUSH
ADDITIONAL INFORMATION CONTACT YOUR DEALER.
YOUR TURNTABLE IS DESIGNED TO ACCOMMODATE AN EXTRA ARMBASE ON THE
LEFT SIDE. IF REQUIRED.
2 CAPS (2.Oml) OIL
PHOTO 1 PHOTO 2
4 X ADJUSTABLE FEET BASE PLINTH BEARING WELL
SPINDLE INTO BEARING WELL 2 x LIFTING HANDLES
PHOTO 3 PHOTO 4
LOWER PLATTER ONTO SPLINDLE
To Next Page
