Need help?Do you have a question about the NOVACAT s10 and is the answer not in the manual?
Explanation of the CE conformity marking.
Interpretation of various safety pictograms.
Identification of major machine components.
Description of different model specifications.
General requirements for the tractor unit.
Importance of front axle ballast for stability.
Specifications for the tractor's three-point hitch.
Setting the tractor's hydraulic system for the implement.
Details on required tractor hydraulic connections.
Details on required tractor electrical connections.
Procedure for setting the tractor's lower links.
Step-by-step guide for attaching the implement.
Adjusting the implement's frame for proper attachment.
Procedure for adjusting the tractor's upper link.
Steps for conducting an initial operational test.
Procedure for setting the hydraulic relief pressure.
Procedure to move the mower to field transport.
Procedure to move the mower to road transport.
Procedure to move the mower to working position.
Operation of individual mower unit lifting.
Step-by-step guide for disconnecting the implement.
Essential checks and precautions before operation.
Required checks after initial use.
Recommendation for hearing protection due to noise levels.
Instructions for the mowing process.
Parameters and adjustments for optimal operation.
Importance and condition of safety covers.
Critical safety advice for slope operations.
Description of the swath disc component.
Procedure for adjusting swath disc height.
Description and application of the conical disc.
Function and purpose of the anti-collision system.
How to use the anti-collision system.
Explanation of different working width configurations.
Steps to change the working width.
Safety precautions during maintenance tasks.
Guidelines for long-term machine upkeep.
Information on using genuine Pöttinger parts.
Instructions for cleaning machine components.
Recommendations for storing the machine outdoors.
Procedures for preparing the machine for winter.
Maintenance advice for cardan shafts.
Maintenance of the hydraulic system.
Reference to where repair details can be found.
Procedure to check cutter bar oil level.
General check for oil levels in components.
Procedure for changing main gear oil.
Procedure for changing angular gear oil.
Procedure for changing cutter bar oil.
Steps for fitting new cutter blades.
Inspection of cutting blade bracket wear.
Component for efficient blade replacement.
Inspection of blade mounting for wear.
General procedure for component checks.
Procedure for replacing cutter blades.
Instructions for securing the lever during storage.
Detailed specifications for models.
List of tractor connections needed for operation.
Optional features available for the machine.
Location and importance of the machine's identification plate.
Guidelines on the intended use of the machine.
Instructions for safe lifting and handling of the implement.
General safety advice for operating the machine.
Importance of reading and following the manual.
Requirements for machine operators.
Scope of user-performable repairs and maintenance.
Clarification of the machine's intended application.
Guidance on using original Pöttinger spare parts.
Importance of maintaining safety guards.
Pre-operation checks and readiness.
Warning regarding potential asbestos content in components.
Rule against carrying passengers on the machine.
Factors affecting tractor handling with implement.
Broad safety and operational guidelines.
Instructions for cleaning the implement.
Details specific to the Power Take-Off shaft.
Procedure for selecting the correct driveshaft length.
Steps for adjusting the driveshaft length.
Function and importance of the driveshaft safety chain.
Operational guidelines for the PTO shaft.
Care and upkeep of the PTO shaft.
Specific instructions for driveshafts with a friction clutch.
Key for identifying lubricant types and codes.
Specific steps for cutter bar maintenance and repair.
Guidance on assembling cutting discs.
Step-by-step guide for installing taper bushes.
Diagram of the machine's hydraulic system.
Wiring diagram for the machine's control system.
Description and wiring of the cable harness.
Considerations for integrating implement with tractor.
Method to calculate actual front axle load.
Method to calculate the total machine weight.
Method to calculate actual rear axle load.
Information on permissible tyre load limits.
To Next Page
General