Need help?Do you have a question about the NOVACAT s12 and is the answer not in the manual?
Illustrates and explains various safety symbols used in the manual.
Specifies required tractor front ballast for safe operation and steering.
Requirements for the tractor's three-point hitch system.
Lists required hydraulic connections and operating pressure specifications.
Details the electrical connections needed for the mower.
Step-by-step guide to attaching the mower.
Essential checks and procedures for initial operation.
Detailed steps to safely detach the mower from the tractor.
Crucial points to check before operating the mower.
General safety guidelines for safe mower operation.
Step-by-step instructions for performing mowing operations.
Adjustments for tractor hydraulics and headstock.
Safety precautions and advice for operating on inclines.
Description of the collision protection mechanism.
Critical safety points for all maintenance tasks.
Overall guidelines for keeping the machine in good condition.
Procedure to check and maintain oil level in the cutter bar.
Instructions for draining and refilling the main gear oil.
Procedure for changing the oil in the angular gear.
Instructions for changing the oil in the cutter bar gearbox.
Detailed steps for fitting new cutter blades correctly.
How to inspect cutting blades and brackets for wear.
Step-by-step guide for replacing cutter blades.
Detailed procedures for repairing the cutter bar assembly.
To Next Page
General