2. Safety regulations
2.1. Operating
This unit is not intended for use by persons with reduced physical, sensory, or mental capabilities except
the case, when they are instructed about safe operating before. Ensure proper supervision of children and
keep them away from unit. Make sure all operators are instructed on safe and proper use of unit. Do not
operate unattended.
Monitor temperatures closely for safety.
ELECTRIC SHOCK, FIRE OR BURN INJURIES CAN OCCUR IF THIS EQUIPMENT IS NOT USED PROPERLY.
TO REDUCE RISK OF INJURY:
• Have the unit installed by qualified service personnel;
• Plug only into grounded electrical outlets matching the required voltage;
• Unplug the unit before cleaning or moving.
2.2. Service
To avoid serious injury or damage, never attempt to repair the heated cupboard or replace a damaged
power cord yourself. Contact a qualified professional repair service.
Always disconnect the heated cupboard before servicing or replacing any electrical
component.
If heating fails, first look to see whether the heated cupboard has been unintentionally switched off, or
whether a fuse has blown. If the failure cannot be found, contact your supplier quoting Model and Serial
No. of the heated cupboard. This information can be found on the nameplate.
If heating fails, check and (if needed) replace the heating element. To do so follow the described steps:
Unscrew the six bolts as showed in Fig. 1 (three bolts on the outer side of the cooling cupboard and three
more on the inner side of the cupboard).
Remove the side of the cupboard together with the heating element inside. Afterwards disassemble the
removed side wall by unscrewing the holding bolts and nuts, then simply remove the heating element and
change it with the new one. For more information consult the manufacturer with specifying the serial
number of the product of matter.
To Next Page
Loading...