Novita NAC14000 - User Manual

Questions and Answers

D
dominic96Aug 10, 2025
Why is my Novita Air Conditioner not cooling the room?
- J
  jacob88Aug 10, 2025
  If your Novita Air Conditioner can be turned on but isn't cooling the room, there might be several reasons: * Ensure that windows and doors are closed, and curtains are drawn to confine the area. * Eliminate any heat sources from the room. * Make sure the air exhaust hose is properly reattached to the back of the unit. * Confirm that the room size does not exceed the recommended coverage area. The maximum coverage area is up to 25 m2 or 269 ft2 for NAC12000 and 27 m2 or 290 ft2 for NAC14000 to operate effectively.
J
Jeffrey TrevinoAug 16, 2025
How to fix Novita NAC14000 Air Conditioner that won't turn on?
- J
  Jonathan AdamsAug 16, 2025
  If your Novita Air Conditioner cannot be turned on, ensure the power plug is correctly inserted into the main supply. If the issue persists, the internal safety device may have tripped, and you should contact Novita Customer Care Centre.
R
rileychristineAug 21, 2025
Why does my Novita NAC14000 smell bad?
- J
  Joan HartAug 22, 2025
  If you notice a sudden unpleasant odor during the operation of your Novita Air Conditioner, the pre-filter screens may be dirty or clogged. Clean and maintain the pre-filter screen regularly to resolve this issue.
A
Angela ByrdAug 27, 2025
What to do if my Novita Air Conditioner stops working after a short time?
- J
  Johnny StewartAug 27, 2025
  If your Novita Air Conditioner only functions for a short period, check the air exhaust hose for bends and ensure it is positioned properly, keeping it short and free from contours. Also, inspect for and remove any obstructions blocking the air discharge.
L
Linda ReynoldsSep 2, 2025
Why Novita NAC14000 Air Conditioner does not start immediately after restarting?
- J
  josephwalkerSep 3, 2025
  It is normal for the Novita Air Conditioner not to operate for about 3 minutes after being restarted. The internal compressor safety device prevents immediate restarting to protect the unit.