Need help?Do you have a question about the Nowy Styl XIO 2.0 and is the answer not in the manual?
Details warnings for hazards like electric shock, crushing, and general safety notes.
Specifies the correct operational environment and usage conditions for the XIO 2.0.
Covers safe transport procedures, lifting, securing, and electrical safety warnings during transit.
Safety for installation, use, electrical connections, and operating the sliding top mechanism.
Addresses noise levels, risks from overloading, crushing due to distance, and cable tripping hazards.
Emphasizes user responsibility, caution, and that the workstation is a machine, not a toy.
Warnings regarding injury to children, lack of personal protection, and being pulled into columns.
Procedure to initialize the workstation and how to adjust the desk height using up/down buttons.
Notes on using correct control modules and anti-collision system during initialization.
Steps to reset the control panel and initialize the system with the display and memory function.
Instructions for adjusting desk height using the up/down buttons on the display control panel.
Guide on how to save preferred desk heights to memory presets using the control panel.
Procedure to switch display units and correct discrepancies between displayed and actual desk height.
Instructions to reset the control panel to its original factory default configuration.
How to define and set custom limits for desk height movement.
Procedure to remove previously set custom lowest or highest position stop settings.
Troubleshooting for a stationary workstation or issues with slow or erratic movement.
Covers errors related to drive circuits, connections, system protection, collision, and overload.
Details errors for loss of synchronization and anti-collision sensor issues.
Addresses errors from controller conflicts, stuck buttons, voltage issues, and parameter discrepancies.
Guidance on initialization, calibration, drive short circuits, and errors from power failure.
Understanding acoustic feedback for normal operation, resets, and limit position confirmation.
Interpreting klick-codes indicating drive connection loss, uneven table movement, or other errors.
Guidelines for maintenance, repairs, and cleaning, emphasizing safety and qualified personnel.
General| Type | Office Chair |
|---|---|
| Adjustable Lumbar Support | Yes |
| Warranty | 5 years |
| Seat | Yes |
| Adjustable Armrests | Yes |
| Material | Fabric |
| Frame | Steel |
| Adjustability | Seat height, armrests |
| Wheels | Yes |
To Next Page
