8
Conrm on-screen that
shutdown is required. Follow
on-screen instructions.
Fully close each cylinder and
depressurise the supply lines
using the purge needle.
Check regulator gauge
pressure is relieved and
remove regulator from each
cylinder and stow on system
trolley.
Remove all single patient
use devices from monitor
and dispose of according to
local regulations.
Drain water trap and dispose
of drainage syringe.
On completion of last
instruction screen, system
will purge and shutdown
safely ready for storage.
2
3
4
5
6
7
Shutdown
Remove power supply and
store on trolley for transport.
Ensure system is attached to
suitable mains supply whilst
in storage.
8
When ready to shutdown
the system, briey press the
power button on the
monitor .
1
To Next Page